rothwell9

MC1-H

step-up transformer for high output moving coil cartridges

MC1Hs

The MC1-H is a step-up transformer designed specifically for “high output” moving coil cartridges where the output voltage is significantly lower than a typical moving magnet cartridge (which is about 5mV). Cartidges in this category include the:
Denon DL-110
Denon DL-160
Benz Micro MC Silver
Hana EH
Hana SH
Roksan Shiraz

Any high output mc cartridge with an output voltage in the range 0.8mV to 1.8mV will benefit from an increased signal level and improved signal-to-noise ratio when used with the MC1-H.
Cartridges in the range 1.8mV to 2.5mV may also benefit from the MC1-H.

specifications

turns ratio
voltage gain
input impedance*
optimum load impedance**
bandwidth
cartridge compatibility (o/p)
cartridge compatibility (imp.)
dimensions
weight

1:3.2
10dB (x3.2)
400 ohms
47k + 150pF
5Hz - 36kHz (+0/-3dB)
0.8mV - 1.8mV (ideal), 1.8mV - 2.5mV (acceptable)
internal impedance <200 ohms
60 x 155 x 92 mm
580g

How to buy
The cost of the MC1-H is £285 (uk retail) and units can be obtained from our hi-fi dealers (full list) or by contacting Rothwell Audio Products directly by email or telephone (+44 (0)1204 366133) or from the online shop.

shop-sign-2
[Home] [Hi-Fi] [Attenuators] [Indus SE] [Rivers] [Hi-Fi dealers] [moving coil step-up transformer] [about Rothwell] [contact] [Rialto mm/mc phonostage] [mc step-up transformers explained] [mc step-up transformer] [valve phonostage] [SUT] [Simplex MM phonostage] [step-up transformers for Denon cartridges] [Signature One phonostage] [Headspace mc headamp] [SUT for HOMC] [Signature Two mc phonostage] [Custom step-up transformer] [Guitar] [shop]